锚-线性执行器工具
ReSOLVE Family instrumented wireline intervention services
Employ controlled high-force linear actuation with high-expansion anchoring capability.
Precise, versatile 切割 for various downhole well intervention applications
在所有井段, slot 切割 services are critical and required for enabling through-tubing pressure equalization, 液循环, and production enhancement for wells completed with sand screens. A high number of cuts may be required in a wide variety of casing types, 成绩, 以及潜在的极端井下环境.
The ReSOLVE iX™ intelligent extreme wireline intervention service has been customized for an extreme-performance slot cutter application. 这是仪表和表面控制, nonexplosive mechanical slot cutter is an alternative solution to conventional explosive tubing punchers or other mechanical punchers, 扩大ing the operational capacity of downhole 切割 and perforating methods for increasingly complex well designs.
The award-winning ReSOLVE iX槽刀 consists of a scissor-opening assembly with a rotatable 切割 blade on one arm, 用一个固定的锚来稳定另一个.
槽刀配置是非常通用的, letting you combine up to eight slots simultaneously and up to 200 slots in a single run while maintaining 切割 efficiency. The tool seamlessly combines with other intervention services, 包括日志记录, 清洁, 切割, 和铣, as well as other mechanical intervention and production logging tools for combining multiple operations into one run.
The 切割 process is controlled by using hydraulic pressure to open the cutter arms, with progress monitored in real time and the maximum depth of cut depending on the selected blade design. Controlling the precise cut depth and confirming completion significantly reduces the risk of damaging control lines or the annular tubing.
解决iX槽位刀规格 | |
Output | 槽切完井确认, 切割功率和电子温度监测, 切割叶片开启压力, 切割刀片速度测量, 锚开力及直径测量, 头紧张, 井筒压力, 井筒温度, logging-while-切割槽, 创新领导力, 还有可选的伽马射线 |
油管内径,min. | 3.5 in [88.9 mm] |
油管外径,最大. | 7 in [177.8 mm] |
槽宽度 | 0.12 in [3.05 mm] |
压力等级 | 20,000 psi [137 MPa] |
温度范围 | 32至350华氏度[0至177摄氏度] |
限制,最小值. | 2.75 in [69.85 mm] |
用于油管厚度的工具外径 <0.254 in [<6.45mm]* |
2.68 in [68.07 mm] |
长度* * | 34.3 ft [10.45 m] |
重量* * | [3] [j].3 kg] |
张力 | 25000磅[111200牛] |
压缩 | 25000磅[111200牛] |
槽切长度 | 配置和管道相关 |
认证 | NACE MR0175符合H - O和CO - |
捕鱼的能力 | 可选2 1/8或3 1/8-in [53.98- or 79.38-mm] WIReD™ wireline inline release device above and below tractors |
特殊Applications | Qualified for up to 200 slot cuts per run; custom applications available upon request for high-strength pipe, 更高数量的槽切每次运行, 并可扩展狭缝,适用于更大的流通面积 |
All values are for standard specifications and are subject to change without notice. A dedicated engineering team is available for customizing tools to address your challenges.
* 3.2 in [81.28 mm] for tubing thickness >0.255 in [>6.48 mm].
** Length and weight depend on integrated service configuration. Applications outside the defined operating envelope should be shared with an 全国快3信誉最好的老平台 representative for risk assessment.
Case Studies
Wireline intervention service cuts 275 slots in production tubing in only three runs, 节省9个钻井日.
阅读更多